Plug
A Saluji Engineering is a leading company that give you the best services, we ensure that all the Plugs manufactured are designed to withstand high pressures and temperatures so that even if there is an imbalance in the piping and tubing system, there is no possibility of leakages from the dead-ends. We offer Plugs in various dimensions that are non-corrosive, leak-proof, and extremely easy to install at dead-ends. A Plug is one of the most commonly used components in a hydraulic or pneumatic piping system. It is used to close all dead-ends or plug ends where you feel you may expand at a later point in time. Since pneumatic and hydraulic systems operate at high pressures and flow rates, it is extremely important that the dead-ends are properly plugged and there is no possibility of leakage through these dead-ends.
T | B | |
| inch | mm | UNF |
| 1/8 | – | 5/16 x 24 |
| 3/16 | – | 3/8 x 24 |
| 1/4 | 6 | 7/16 x 20 |
| 5/16 | 8 | 1/2 x 20 |
| 3/8 | 10 | 9/16 x 18 |
| 1/2 | 12 | 3/4 x 16 |
| 5/8 | 16 | 7/8 x 14 |
| 3/4 | 18 | 1-1/16 x 12 |
| 7/8 | 20 | 1-3/16 x 12 |
| 1 | 25 | 1-5/16 x 12 |